Elecrow

    This is a 3 Pole 5.0mm Screw Terminal Block.It includes 5 units of Terminal Block.There are screws which are tightened for a secure connection for both lugs and bare wire....

    This is a 3 Pole 5.0mm Screw Terminal Block.It includes 5 units of Terminal Block.There are screws which are tightened for a secure connection for both lugs and bare wire. Specification Rated: 250,16A(250V,17.5A)Contact resistance: 200m? MaxInsulation resistance: 5000M? MinTemp range: -30?~+120?Max Soldering: +260? 5sWire range: 22-14AWG(1.5mm2)Strip length: 3.5mm      ...

    These headers are made to work with the Arduino Uno R3,Leonardo and new Arduino boards going forward. They have longer contact length for clearing the USB-B connector and great for...

    These headers are made to work with the Arduino Uno R3,Leonardo and new Arduino boards going forward. They have longer contact length for clearing the USB-B connector and great for stacking multiple shields. This kit includes 4 headers (2 8-pin and 1 6-pin and 1 10-pin), enough to connect a shield to an Arduino UNO R3 Main Board. Include 1x 1x6 Female Header for Arduino 2x 1x8 Female Header for Arduino 1x 1x10 Female Header For Arduino ...

A pack that includes 5pcs 1x6 female headers. They have 2.54mm spacing between pins, suitable for the Arduino 6 pin connections. Of course they can also be cut to any size for your special project....

A pack that includes 5pcs 1x6 female headers. They have 2.54mm spacing between pins, suitable for the Arduino 6 pin connections. Of course they can also be cut to any size for your special project. Specification Pin Pitch: 2.54mmContact Qty: 6Contact Length: 6.3cmContact Type: Straight ...

    A pack that includes 5pcs 1x8 female headers. They have 2.54mm spacing between pins, suitable for the Arduino 8 pin connections. Of course they can also be cut to any size for your...

    A pack that includes 5pcs 1x8 female headers. They have 2.54mm spacing between pins, suitable for the Arduino 8 pin connections. Of course they can also be cut to any size for your special project. Specification Pin Pitch: 2.54mm Contact Qty: 8 Contact Length: 6.3cm Contact Type: Straight ...

    This is a pack which includes 5pcs 10 pin female header. We use this header on all our XBee series modules. They have 0.2mm spacing between pins. Specification Pin Pitch: 2.0mm Contact...

    This is a pack which includes 5pcs 10 pin female header. We use this header on all our XBee series modules. They have 0.2mm spacing between pins. Specification Pin Pitch: 2.0mm Contact Qty: 10 Contact Type: Straight ...

    This is 3D Printer Z Axis Screw Stepper Motor. Features Screw : M8 Diameter: 8mm Screw length : 300MM Model: 17HD40005-300N Step angle: 1.8? Rated voltage: 2.4V Rated current:...

    This is 3D Printer Z Axis Screw Stepper Motor. Features Screw : M8 Diameter: 8mm Screw length : 300MM Model: 17HD40005-300N Step angle: 1.8? Rated voltage: 2.4V Rated current: 1.5A Phase resistance: 1.5? Rotor inertia: 57g.cm2 Phase resistance: 1.5? Rotor inertia: 57g.cm2 Height of motor: 4.2cm ...

This 2IN1 Two TF cards commutator is specially designed for Raspberry pi B+/2B/3B with double switch systems. You could enjoy the convenience of using two TF cards at the same time to transfer to...

This 2IN1 Two TF cards commutator is specially designed for Raspberry pi B+/2B/3B with double switch systems. You could enjoy the convenience of using two TF cards at the same time to transfer to different systems for playing at the poking of the switch. Moreover if you could change the dial switch to arduino or SCM GPIO controlled, it could help you realize wireless/ remote/ infrared remote control system etc. Note: It should be used when off power or its system will be damaged when on power...

    This is 200mm long 5pin female to female jumper wire which uses high quality 26# line. Great for jumping from board to board. These are simple jumper wires used on standard...

    This is 200mm long 5pin female to female jumper wire which uses high quality 26# line. Great for jumping from board to board. These are simple jumper wires used on standard 2.54mm(0.1") breakaway headers. The pack include 5pcs of this cable.

    This is a splittable 40 pin 20mm length dual female jumper wire for 2.54mm, it is very flexible, can be used at bread board or other places need connection. it is able to...

    This is a splittable 40 pin 20mm length dual female jumper wire for 2.54mm, it is very flexible, can be used at bread board or other places need connection. it is able to transformed from 1-20 pin jumper wire.   

    This is 200mm long 3pin female to female jumper wire which uses high quality 26# line. Great for jumping from board to board. These are simple jumper wires used on standard...

    This is 200mm long 3pin female to female jumper wire which uses high quality 26# line. Great for jumping from board to board. These are simple jumper wires used on standard 2.54mm(0.1") breakaway headers. The pack include 5pcs of this cable.

    This HDMI Cable connect two HDMI devices together such as TV monitor and your laptop. It has nice molded grips for easy installation, and is 1.5 meter long. Be aware that...

    This HDMI Cable connect two HDMI devices together such as TV monitor and your laptop. It has nice molded grips for easy installation, and is 1.5 meter long. Be aware that it's HDMI v1.4 standard, it is compatible with HDMI 1.2 and 1.3. Features Audio Return Channel 3D - 3D is the latest rage for both home theater and gaming. A High Speed HDMI? Cable is capable of handling the high bandwidth requirements of 3D signals. Support display 4096 x 2160 pixels @ 30 Hz, which is...

    This is 200mm long 10pin female to female jumper wire which uses high quality 26# line. Great for jumping from board to board. These are simple jumper wires used on standard...

    This is 200mm long 10pin female to female jumper wire which uses high quality 26# line. Great for jumping from board to board. These are simple jumper wires used on standard 2.54mm(0.1") breakaway headers.

    This is a splittable 40 pin 30mm length dual female jumper wire for 2.54mm, it is very flexible, can be used at bread board or other places that need connection. it is able...

    This is a splittable 40 pin 30mm length dual female jumper wire for 2.54mm, it is very flexible, can be used at bread board or other places that need connection. it is able to transform to  1-40 pin jumper wire. 

    This is 200mm long 9pin female to female jumper wire which uses high quality 26# line. Great for jumping from board to board. These are simple jumper wires used on standard...

    This is 200mm long 9pin female to female jumper wire which uses high quality 26# line. Great for jumping from board to board. These are simple jumper wires used on standard 2.54mm(0.1") breakaway headers.

A 3 pin Crowtail cable for connecting the modules with main control board. Sell at a low price with good quality. If you want to choose 4 pin cable please click here 4 Pin Crowtail Cable...

A 3 pin Crowtail cable for connecting the modules with main control board. Sell at a low price with good quality. If you want to choose 4 pin cable please click here 4 Pin Crowtail Cable Specification Length?20.5cm Package list 3 Pin Crowtail Cable x 5 Wiki & External links ...

    This is a pack including 20pcs of 200mm dual-female dual-row DuPont jumperswith multiple colors. Both terminal of the wire are 2.00mm,they are flexible and splittable, and they work...

    This is a pack including 20pcs of 200mm dual-female dual-row DuPont jumperswith multiple colors. Both terminal of the wire are 2.00mm,they are flexible and splittable, and they work perfectly with breadboards. Specification Wire Qty:20 Length:200mm Connector Type:2.0 DuPont female to female Color: Combined ...

This Electronic Brick Starter kit is just for the Arduino newbies, it includes the most widely used modules, especially these for Arduino new starters. As the advantage of Electronic Brick, user can...

This Electronic Brick Starter kit is just for the Arduino newbies, it includes the most widely used modules, especially these for Arduino new starters. As the advantage of Electronic Brick, user can build their own projects without knowing anything about soldering&drivers. Detailed guidebook is also prepared, it helps the starters get the basic knowledge of Arduino and usage of each modules step by step. After your careful reading&learning of this guidebook, it would be sure that you will be...

    This is an awesome large sized RGB LED Matrix with superbright and beautiful performance.It has 64 5mm circle-dot and it's perfectly compatible with our Rainbow shield V1.0....

    This is an awesome large sized RGB LED Matrix with superbright and beautiful performance.It has 64 5mm circle-dot and it's perfectly compatible with our Rainbow shield V1.0. For more details, please refer to the datasheet. Specification Dot Size: 5.0mmPixel Array: 8?8Dimension: 48mm?48mmReverse Voltage(Max): 5V Forward Current(Max) : 20mAPeak Forward Current(Max): 60mAPower Dissipation(any seg): 40mWOperating Temperature(Max): -10~+80??/li>Storage Temperature(Max):...

    With this cheap infrared controller, you can easily make remote control projects such as the Arduino IR Remote receiver thanks to the open-hardware community, there are also...

    With this cheap infrared controller, you can easily make remote control projects such as the Arduino IR Remote receiver thanks to the open-hardware community, there are also some IR libraries such the joshuajnoble IR library for you to make everything in your house to be remote-control. This remote control offer 21 buttons, we suggest you use this remote control with the IR reciever. Features Demension:84mmx39mm Buttons: 21 Distance:>8m Battery:3V Button Cell Wiki...

Description LEDs - Basic electronic parts. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic 5mm LED with a yellow lens.10pcs per...

Description LEDs - Basic electronic parts. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic 5mm LED with a yellow lens.10pcs per pack. Specification Diameter : 5mm Voltage : 1.9V-4.5VCurrent : 5mA -15mA ...

Description These are very bright LEDs, the lens of this super bright blue LED is 3mm in diameter. 10pcs per pack. Specification Diameter : 3mm Voltage : 3.1-3.6vCurrent : 5mA - 7.5mA...

Description These are very bright LEDs, the lens of this super bright blue LED is 3mm in diameter. 10pcs per pack. Specification Diameter : 3mm Voltage : 3.1-3.6vCurrent : 5mA - 7.5mA      ...

Description These are very bright LEDs, the lens of this super bright green LED is 3mm in diameter. 10pcs per pack. Specification Diameter : 3mm Voltage : 2.5-3.2VCurrent : 5mA - 7.5mA...

Description These are very bright LEDs, the lens of this super bright green LED is 3mm in diameter. 10pcs per pack. Specification Diameter : 3mm Voltage : 2.5-3.2VCurrent : 5mA - 7.5mA      ...

    John Jay based in Georgia, USA, is a retired engineer who designed some boards for the Raspberry Pi to help his partner to learn Raspberry Pi. Although at first it was a...

    John Jay based in Georgia, USA, is a retired engineer who designed some boards for the Raspberry Pi to help his partner to learn Raspberry Pi. Although at first it was a small act that just for his friends, but with the growing people in the open-source community participating, more and more people find that these packages really works. So, he decided to releases these kits. Cooperated with Elecrow, these packages have been produced quickly. And here with Elecrow, we...

This is a digital display thermometer which use with DS18B20. It has a Panel table that can display the temperature information. Internal use of the latest type of A / D conversion chip and...

This is a digital display thermometer which use with DS18B20. It has a Panel table that can display the temperature information. Internal use of the latest type of A / D conversion chip and high-stable reference IC, extensive use of SMD components, circuit design and reasonable. It can be used to measure voltage, current, but also external sensors to measure temperature, pressure, displacement, and other physical quantities. Suitable for a variety of digital instrument display purposes. It has...

This 6 in 1 Screwdriver Tool Set is ideal for the preservation and maintenance of precise work and some optics facilities, such as precise watches, mobile phones, televisions, PDA,PC and other...

This 6 in 1 Screwdriver Tool Set is ideal for the preservation and maintenance of precise work and some optics facilities, such as precise watches, mobile phones, televisions, PDA,PC and other applications. This set coming with 6pcs multi size bits can be also fit most phones in the market. Features 0.8mm bit Pentalobe screwdriver for the screws of iPhone 4/4S,iPhone 5 bottom cover/case T5 bit Screwdriver for the screws of Motorola and Nokia T6 bit Screwdriver for the screws of Motorola and...

Electrical tape is a type of pressure-sensitive tape used to insulate electrical wires and other materials that conduct electricity. It is very useful in our daily life.For example,when your wire...

Electrical tape is a type of pressure-sensitive tape used to insulate electrical wires and other materials that conduct electricity. It is very useful in our daily life.For example,when your wire was bitten by something, it will come in handy.Specifications Material: PVC Adhesive: Nature Rubber, Pressure Sensitive AdhesiveThickness: 0.13mm Width: 18mm Length: 10m Use temperature: 0~80\xb0C MAX use voltage: 600VElongation at break: 150% ~ 220% tensile stress: 2.5-3Kg/cm Features For insulating...

A 4 pin Crowtail cable for connecting the modules with main control board. Sell at a low price with good quality. If you want to choose 3 pin cable please click here 3 Pin Crowtail Cable...

A 4 pin Crowtail cable for connecting the modules with main control board. Sell at a low price with good quality. If you want to choose 3 pin cable please click here 3 Pin Crowtail Cable Specification Length?20.5cm Package list 4 Pin Crowtail Cable x 5 Wiki & External links ...

     The Crowtail- Base Shield plugs into Arduino and is the foundation of the Crowtail system. ALL I/O ports of the Arduino are exposed and adapted into Crowtail connectors...

     The Crowtail- Base Shield plugs into Arduino and is the foundation of the Crowtail system. ALL I/O ports of the Arduino are exposed and adapted into Crowtail connectors which include digital I/O,analog I/O,and specialized ports(I2C?UART). Features Working voltage: 3.3~5 VDC RoHS Compatible Package list Base Shield x1 Wiki & External links Base Shield Schematic Wiki link ...

This is a Compatible cable between the Crowtail system and Grove system. It can connect any crowtail module to Grove ? base shied or to other compatible boards, also it can connect the Grove module...

This is a Compatible cable between the Crowtail system and Grove system. It can connect any crowtail module to Grove ? base shied or to other compatible boards, also it can connect the Grove module to the Crowtail ?Base Shield. For example, the Grove ?Button can connect to the Crowtail ?Base Shield, and the Crowtail ? Button can connect to the Grove ? Base Shield with this compatible cable.      Features Length:20cm 3Pin to 4Pin Part List 1 X Crowtail- 3 pin to 4 pin...

   A NEW Crowtail product! we add a crowtail port for pluging into crowtail base board. so it can simple use for our Crowduino. The Sharp distance sensors are a popular choice...

   A NEW Crowtail product! we add a crowtail port for pluging into crowtail base board. so it can simple use for our Crowduino. The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than other IR alternatives. Interfacing to most microcontrollers is straightforward: the single analog output can be connected to an...

The motor base shield is based on the dual channel motor driver IC L298P, it integrate the Crowtail-base shield and motor & stepper shield. It will bring convenience to your work with Crowduino....

The motor base shield is based on the dual channel motor driver IC L298P, it integrate the Crowtail-base shield and motor & stepper shield. It will bring convenience to your work with Crowduino. Stackable design still using, The switch helps to power on/off the Motor Base Shield, which make it more convenient in using, especially in your building& debugging. To ensure the L298P works in best status, the PCB layout meets the max current 2A requirements. There are 8 LEDs to indicate the...

It is a cost-effective shell for your Micro: bit development board. The shell has a transparent acrylic body, which can allow you see the inside clearly. It can be assembled yourselves, and there is...

It is a cost-effective shell for your Micro: bit development board. The shell has a transparent acrylic body, which can allow you see the inside clearly. It can be assembled yourselves, and there is no lock, so it is easy to assemble. It is designed for Micro: bit development board, the high practical value and beautiful looking can be a great choice for you. Specifications Color: transparent Size: 33x86mm Material: acrylic Package list Transparent Acrylic Shell for Micro: bit x 1 ...

This is a GPIO expansion board for Micro: bit, it?s convenient to operate. It can be inserted the expansion board directly into the Micro: bit, and this expansion board can be cascaded....

This is a GPIO expansion board for Micro: bit, it?s convenient to operate. It can be inserted the expansion board directly into the Micro: bit, and this expansion board can be cascaded. Specifications Size: 64 x 37 x 12 mm Package list Micro: bit GPIO expansion board x 1 ...

The Wireless SD card shield allows an Arduino board to communicate wirelessly using a wireless module, and adds storage to your Arduino project. The XBee Shield is based on the Xbee modules from...

The Wireless SD card shield allows an Arduino board to communicate wirelessly using a wireless module, and adds storage to your Arduino project. The XBee Shield is based on the Xbee modules from Digi, but can use any Bee module with the same footprint. It supports SD, SDHC, or MicroSD TF cards. Use the on-board toggle switch to select the SD card type. And when you want plug a sd card on it,you should select the switch to the right direction. About the wireless module, it only uses you two...

    This is a platform using the ATMEGA48 to help you using the NRF24L0 Module easily. It uses the I2C (TWI) communication protocol to communicate with other controller such as...

    This is a platform using the ATMEGA48 to help you using the NRF24L0 Module easily. It uses the I2C (TWI) communication protocol to communicate with other controller such as the Arduino thus to simplify the NRF24L01 communication. With this module, you do not need to understand the tedious communication process of NRF24L01 anymore, building NRF24L01 wireless application would be much easily. Also Demo on Arduino platform would help you learning how to use this module in...

    The Elecrow Bluetooth Bee is designed for transparent wireless serial connection setup. It is a fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps modulation with...

    The Elecrow Bluetooth Bee is designed for transparent wireless serial connection setup. It is a fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps modulation with complete 2.4GHz radio transceiver. It uses CSR Bluecore4-external single chip Bluetooth system with CMOS technology and with AFH (Adaptive Frequency Hopping). It can be configured to Master, Slave or Loopback three different modes(HC-06 just be Master/Slave, coulud be customized), and it will...

     This serial WiFi transceiver module is based on ESP8266 SoC.. ESP8266 is a highly integrated chip that has Integrated TCP/IP protocol stack. It offers a complete and...

     This serial WiFi transceiver module is based on ESP8266 SoC.. ESP8266 is a highly integrated chip that has Integrated TCP/IP protocol stack. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.      Besides, ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the...

NL6621M is a highly integrated SOC, especially for the low-cost high data throughput wireless LAN products and designs. It integrates MCU, MAC, 1T1R baseband and RF transceiver with power amplifier...

NL6621M is a highly integrated SOC, especially for the low-cost high data throughput wireless LAN products and designs. It integrates MCU, MAC, 1T1R baseband and RF transceiver with power amplifier on a single chip NL6621M support 802.11b / g / n and Wi-Fi direct (SDIO card mode), BSS STA, soft AP, WiFi Protected Setup. It also supports WMM-PS and WPA / WPA2 security protocol. NL6621M not only for controlling by the host processor from the device but also can be used as standalone WLAN...

MT7681 contains high speed processor, the CPU can be used by the customer, without external microcontroller to achieve data transmission. There are dozens of K application space FALSH can use, more...

MT7681 contains high speed processor, the CPU can be used by the customer, without external microcontroller to achieve data transmission. There are dozens of K application space FALSH can use, more than 10 K RAM idle, peripheral 5 IO port and serial port can be feel free to call. Internal MT7681 code, need to call a few TCP UDP function, can complete the link of data sending and receiving function. At present this module source code is to demonstrate MT7681 internal CPU and the whole process...

    John Jay based in Georgia, USA, is a retired engineer who designed some boards for the Raspberry Pi to help his partner to learn Raspberry Pi. Although at first it was a...

    John Jay based in Georgia, USA, is a retired engineer who designed some boards for the Raspberry Pi to help his partner to learn Raspberry Pi. Although at first it was a small act that just for his friends, but with the growing people in the open-source community participating, more and more people find that these packages really works. So, he decided to releases these kits. Cooperated with Elecrow, these packages have been produced quickly. And here with Elecrow, we...

This product is compatible with Raspberry Pi Model B+ and B. With a resolution of 84 X 48, this Mini LCD screen displays the CPU utilization and the memory occupancy rate that runs on your Raspberry...

This product is compatible with Raspberry Pi Model B+ and B. With a resolution of 84 X 48, this Mini LCD screen displays the CPU utilization and the memory occupancy rate that runs on your Raspberry Pi through Raspberry Pi internal Python programming. It is clear at a glance. Geek players can also program by themselves to display any content. When the Raspberry Pi is used as a server, you can also see the operating condition of Raspberry Pi at night. Package list 5110 Mini LCD 84*48 PCD8544...

EDUP"s Wireless-N USB 2.0 Adapter allows you to connect your laptop or desktop to any Wireless-N networks in your home or office. The Wireless-N (802.11n) USB 2.0 Adapter is great for those who want...

EDUP"s Wireless-N USB 2.0 Adapter allows you to connect your laptop or desktop to any Wireless-N networks in your home or office. The Wireless-N (802.11n) USB 2.0 Adapter is great for those who want to upgrade older computers to be able to access the internet over a Wireless-N network. This EDUP Wireless-N USB 2.0 Adapter can offer you 5 times faster than traditional Wireless-G (802.11b) networks. It also allows for high speed data transferring, online gaming, and lightning downloads. The...

This HDMI connector is specially designed for CrowPi with Raspberry Pi 4B. If you want to upgrade your Crowpi to Raspberry Pi 4B, It is necessary to as a connector. ...

This HDMI connector is specially designed for CrowPi with Raspberry Pi 4B. If you want to upgrade your Crowpi to Raspberry Pi 4B, It is necessary to as a connector.

    The Wireless Charger& Receiver adopts two copper wire coil superposition to active the wireless charging, it can be used in electronic equipments in common use for close...

    The Wireless Charger& Receiver adopts two copper wire coil superposition to active the wireless charging, it can be used in electronic equipments in common use for close wireless charging or power supply. This product consisted of a transmitter and receiver, could serve as a replacement for the Wireless Power Supply with stable 5V output voltage and maximum 600mA output current. Its small size and insulation coil is more suitable for using in wireless...

    This is a breakout board for the L3G4200D. the L3G4200D is a low-power three-axis angular rate sensor able to provide unprecedented stablility of zero rate level and...

    This is a breakout board for the L3G4200D. the L3G4200D is a low-power three-axis angular rate sensor able to provide unprecedented stablility of zero rate level and sensitivity over temperature and time. It includes a sensing element and an IC interface capable of providing the measured angular rate to the external world through a digital interface (I2C/SPI).     The L3G4200D has a full scale of +/-250 / +/-500 / +/-2000 dps and is capable of...

    This Barometer Sensor has a Bosch BMP085 which is a high-accuracy chip to detect barometric pressure and temperature. It can widely measure pressure ranging from 300hPa to...

    This Barometer Sensor has a Bosch BMP085 which is a high-accuracy chip to detect barometric pressure and temperature. It can widely measure pressure ranging from 300hPa to 1100hPa, AKA +9000m to -500m above sea level, with a super high accuracy of 0.03hPa(0.25m) in ultra-high resolution mode. This Barometer sensor compatible with 3.3V and 5V, so it can be used in Arduinos without moditdfication. Features Wide pressure range Arduino/Crowduino compatible interface (3.3V...

    The MQ5 Gas Sensor module is useful for gas leakage detecting. It can detect LPG, i-butane, methane, alcohol, Hydrogen, smoke and so on. The sensitivity can be adjusted using...

    The MQ5 Gas Sensor module is useful for gas leakage detecting. It can detect LPG, i-butane, methane, alcohol, Hydrogen, smoke and so on. The sensitivity can be adjusted using the on-board potentiometer, and you'd use this sensor by reading the analog pin to which it is connected. Please use these sensors only in controlled experiments! Combustible gases and fumes are very dangerous! Here are details for some MQ gas sensor. SysmbolMQ-2MQ-3MQ-5MQ-9Detect GasCombustible...

    The fiber optic Temperature Probe TP-01 is a high precision temperature probe for use in a wide temperature range. It is for the temprature measuring of air/solid, but not...

    The fiber optic Temperature Probe TP-01 is a high precision temperature probe for use in a wide temperature range. It is for the temprature measuring of air/solid, but not for liquid. It is a point-like probe housed in a stainless steel tube and with a connector at one end. you can also find the Thermocouple_K_Female Connetor to integrate this sensor to your PCBA Features Length:100cm Measuring Range:-50 - +400 response time: 5s ...

    This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the...

    This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ?1.5g and ?6g measurement ranges. Other features include a sleep mode, signal conditioning, a 1-pole low pass filter, temperature compensation, self test, and 0g-detect which detects linear freefall. Zero-g offset and sensitivity are factory set and require no external devices....

    devDuino Sensor Node v4 is a compact Arduino-compatible microcontroller and is designed to build wireless networks based on transceiver nRF24L01+. You can easily connect...

    devDuino Sensor Node v4 is a compact Arduino-compatible microcontroller and is designed to build wireless networks based on transceiver nRF24L01+. You can easily connect other sensors or actuators to this platform, to build your remote monitoring or controlling system. Unlike the version 1,2,3 is on board built-in sensor temperature and humidity. Features Built on Arduino-compatible architecture Clock frequency - 16MHz (may be reduced to reduce energy consumption by up...

    The HR202 Humidity Sensor Module ?can be applied to the storage compartment, indoor air quality control, building automation, medical, industrial control systems wide range...

    The HR202 Humidity Sensor Module ?can be applied to the storage compartment, indoor air quality control, building automation, medical, industrial control systems wide range of applications and research fields. Easy to interface with your microcontroller Specification Working voltage: 3.3V to 5V Digital output and you can change when to output 1 and 0. The current of output signal can exceed 15mA PCB Dimension: 3.2cm X 1.4cm Wiki & External links Datasheet of HR202...

    This is an infrared distance switch. It has an adjustable detection ranging from 3cm to 80cm. It is small, easy to use/assemble, and inexpensive. Useful for robotics,...

    This is an infrared distance switch. It has an adjustable detection ranging from 3cm to 80cm. It is small, easy to use/assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line, etc. Specification Power supply: 5V Current: 100mA Range: 3-80cm adjustable Red: +5V Yellow: Signal Black: GND Wire length: 20cm Wiki & External links Manual/Wiki ...

    This is a new version of infrared distance switch. It has small size and higher ranging, it is able to detect ranging from 3cm to 100cm. It is tiny, easy to use/assemble, and...

    This is a new version of infrared distance switch. It has small size and higher ranging, it is able to detect ranging from 3cm to 100cm. It is tiny, easy to use/assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line, etc. Specification Power supply: 3.8v-5.5v Current(5v): 6mA Range: 3-100cm adjustable Wiki & External links Wiki link ...

    This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to...

    This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125 degree, the cable is jacketed in PVC so we suggest keeping it under 100 degree. Because they are digital, you don't get any signal degradation even over long distances! The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and...

Wind & Water Power Turbines Description: The Wind & Water Power Turbines convert the wind & water to the mechanical energy and then convert to electricity power. This mini Turbines...

Wind & Water Power Turbines Description: The Wind & Water Power Turbines convert the wind & water to the mechanical energy and then convert to electricity power. This mini Turbines outputs small power for small projects such as LED, suitable for DIY projects. Note that the output of the turbine is AC, Rectifiers are needed if you want to change it into DC. As we tested, the turbines can power 5 LEDs with a wind speed 20 km/h, and 10 LEDs with a wind speed 50 km/h. you can use this...

    This is a standard '130 size' DC motor. It comes with a wider operating range than most toy motors: from 4.5 to 9VDC, This range makes them perfect for controlling with most...

    This is a standard '130 size' DC motor. It comes with a wider operating range than most toy motors: from 4.5 to 9VDC, This range makes them perfect for controlling with most of the Arduino Motor Shield, or with an Arduino where you are more likely to have 5 or 9V available than a high current 3V setting.      If you find it hard to fix this motor in your project, you can have a look at the 130 DC Motor Bracket, hope it helps for you....

This motor/ servo shield is for Micro: bit, it provides a simple way to add motor driving capability to a micro: bit. The shield can drive 2 motors, 2 servos, and allow the motors to be driven with...

This motor/ servo shield is for Micro: bit, it provides a simple way to add motor driving capability to a micro: bit. The shield can drive 2 motors, 2 servos, and allow the motors to be driven with forward, reverse, stop control. It?s easy to add the motor to the shield, and there is an integrated edge connector slot for your Micro: bit to slot into easily. The shield is powered by the battery, and the battery charged by the USB port. It makes easier to achieve the function of your Micro: bit...

The Electronic Brick - Base Shield module makes you using the Electronic Bricks easier. With this module, you can connect the Electronic Bricks to Arduino&Crowduino directly with jumper wires. For...

The Electronic Brick - Base Shield module makes you using the Electronic Bricks easier. With this module, you can connect the Electronic Bricks to Arduino&Crowduino directly with jumper wires. For the Arduino beginners, the Base Shield is the best tool for stepping into the Arduino world. The female pins on the shield with different color helps user identify the usage of the pins. Yellow represents ?signal?, Red represents ?Power? and Black represents?Ground?. Base Shield is compatible with...

    This is an awesome large sized RGB LED Matrix with superbright and beautiful performance.It has 64 3.6mm circle-dot. For more details, please refer to the datasheet. Can be...

    This is an awesome large sized RGB LED Matrix with superbright and beautiful performance.It has 64 3.6mm circle-dot. For more details, please refer to the datasheet. Can be drivered by Elecrow Rainbow Shield.      Specification Dot Size: 5.0mm Pixel Array: 8x 8 Dimension: 60mmx 60mm Reverse Voltage(Max): 5V Forward Current(Max) : 20mA Peak Forward Current(Max): 60mA Power Dissipation(any seg): 40mW Operating Temperature(Max): -10~+80 Degree Lead...

    Arduino Sensor Shield V4.0 let us to build electronics projects just as easy as piling bricks. It can connect to various modules like sensors, servos, relays, buttons,...

    Arduino Sensor Shield V4.0 let us to build electronics projects just as easy as piling bricks. It can connect to various modules like sensors, servos, relays, buttons, potentiometers. Just plug & play.     Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks,...

    XBee shield will make interfacing multiple Bee-style (XBee, GPS Bee, Bluetooth Bee and etc) easier than ever before. it has large proto area, customizable software, serial,...

    XBee shield will make interfacing multiple Bee-style (XBee, GPS Bee, Bluetooth Bee and etc) easier than ever before. it has large proto area, customizable software, serial, port for easier prototyping. Features arduino main board compatible 3 indicator LED?ON/Sleep, RSSI, ASSOC?for XBee Full size with free drills Reset button for XBee and base board Provide maximal 500mA under 3.3V Full break out for XBee Full break out for the base board Package list XBee Shield PCBA...

    NFC(Near Field Communication) is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing...

    NFC(Near Field Communication) is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity , it builds upon RFID systems by allowing two-way communication between endpoints. Compared with the Bluetooth, which is also short-range communication technology, NFC operates at slower speeds, but consumes far less power and doesn?t require pairing.    &nbs...

    The Joystick Shield enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+...

    The Joystick Shield enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers.     This shield is a great piece of uer interface board, it is perfect for gaming and navigating through menu quickly. It has headers for LCDs and RF modules...