Sale

    John Jay based in Georgia, USA, is a retired engineer who designed some boards for the Raspberry Pi to help his partner to learn Raspberry Pi. Although at first it was a...

    John Jay based in Georgia, USA, is a retired engineer who designed some boards for the Raspberry Pi to help his partner to learn Raspberry Pi. Although at first it was a small act that just for his friends, but with the growing people in the open-source community participating, more and more people find that these packages really works. So, he decided to releases these kits. Cooperated with Elecrow, these packages have been produced quickly. And here with Elecrow, we...

Pi Tin for the Raspberry Pi - Green Description: The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect it...

Pi Tin for the Raspberry Pi - Green Description: The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it. Why not protect it with one of these snazzy plastic enclosures? These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together. As you may have noticed,...

PIC32MX 32-bit Microcontroller Description: The PIC32MX is a high performance 32-bit microcontroller. We bought these in the wrong package and don't have any use for them. Check out the datasheet...

PIC32MX 32-bit Microcontroller Description: The PIC32MX is a high performance 32-bit microcontroller. We bought these in the wrong package and don't have any use for them. Check out the datasheet below for what you can do with this IC. Features: High-Performance 32-bit RISC CPU: MIPS32® M4K® 32-bit core with 5-stage pipeline 80 MHz maximum frequency 1.56 DMIPS/MHz (Dhrystone 2.1) performance at zero Wait state Flash access Single-cycle multiply and high-performance divide unit...

This motor/ servo shield is for Micro: bit, it provides a simple way to add motor driving capability to a micro: bit. The shield can drive 2 motors, 2 servos, and allow the motors to be driven with...

This motor/ servo shield is for Micro: bit, it provides a simple way to add motor driving capability to a micro: bit. The shield can drive 2 motors, 2 servos, and allow the motors to be driven with forward, reverse, stop control. It?s easy to add the motor to the shield, and there is an integrated edge connector slot for your Micro: bit to slot into easily. The shield is powered by the battery, and the battery charged by the USB port. It makes easier to achieve the function of your Micro: bit...

    John Jay based in Georgia, USA, is a retired engineer who designed some boards for the Raspberry Pi to help his partner to learn Raspberry Pi. Although at first it was a...

    John Jay based in Georgia, USA, is a retired engineer who designed some boards for the Raspberry Pi to help his partner to learn Raspberry Pi. Although at first it was a small act that just for his friends, but with the growing people in the open-source community participating, more and more people find that these packages really works. So, he decided to releases these kits. Cooperated with Elecrow, these packages have been produced quickly. And here with Elecrow, we...

Quadstepper Motor Driver Board Description: The Quadstepper motor driver board allows you to control up to 4 bipolar stepper motors simultaneously using logic level IO pins. Each motor driver has an...

Quadstepper Motor Driver Board Description: The Quadstepper motor driver board allows you to control up to 4 bipolar stepper motors simultaneously using logic level IO pins. Each motor driver has an output drive capacity of 35V and 1Amps. The board is capable of driving motors in full, half, quarter, eight, and sixteenth-step modes. The logic levels are selectable between 3.3V and 5V by way of a jumper. The bus header allows you to control all four motors with only 6 IO pins by...

Quick Disconnect - Female 1/5 (bag of 50) Description: These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are...

Quick Disconnect - Female 1/5 (bag of 50) Description: These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these standard connectors. These Female quick-disconnects are about 1/5" wide and can be crimped onto 16-14 AWG wire. Mating connectors can be found in the related items. Documents: Datasheet " ...

"These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these...

"These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these standard connectors. These Female quick-disconnects are about ¼" wide and can be crimped onto 16-14 AWG wire. Mating connectors can be found in the related items. Documents: Datasheet " ...

"These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these...

"These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these standard connectors. These Male quick-disconnects are about ¼" wide and can be crimped onto 22-16 AWG wire. Mating connectors can be found in the related items. Documents: Datasheet " ...

"These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these...

"These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these standard connectors. These Male quick-disconnects are about 1/5" wide and can be crimped onto 22-16 AWG wire. Mating connectors can be found in the related items. Documents: Datasheet " ...

Raspberry PI nRF24 Add-on for Raspberry PI platform. Integrated on-chip transceiver nRF24L01 + PA and LNA allows you to create a wireless connection between the terminal devices (sensors, etc.) and...

Raspberry PI nRF24 Add-on for Raspberry PI platform. Integrated on-chip transceiver nRF24L01 + PA and LNA allows you to create a wireless connection between the terminal devices (sensors, etc.) and servers. The Raspberry PI nRF24 Add-on added all the ingredients needed to make Raspberry PI in a completely finished and inexpensive gateway to build a heterogeneous environment for the smart home. Many Open Source controllers and accessible library will allow you to create any kind of smart,...

Raspberry Pi Zero is a a super-small, hackable, and ultra-low-cost computer. It is half of the size of a Model A+, with twice the utility. It just looks like a slimmed down version of the Raspberry...

Raspberry Pi Zero is a a super-small, hackable, and ultra-low-cost computer. It is half of the size of a Model A+, with twice the utility. It just looks like a slimmed down version of the Raspberry Pi we know and love. It's kind of like the little brother to the Pi 2 - with just a micro SD card slot, a mini HDMI port, two micro USB ports (one for power, one for USB), and 512MB of RAM. It has a single-core 1 GHz processor chip, similar to the Pi A+ and B+. Actually it’s 40% faster than the...

RaspiRobot Board Description: The Raspberry Pi packs plenty of processing power in a small and inexpensive package and that makes it perfect for robot brains! The only problem? The Raspberry Pi may...

RaspiRobot Board Description: The Raspberry Pi packs plenty of processing power in a small and inexpensive package and that makes it perfect for robot brains! The only problem? The Raspberry Pi may have plenty of low-level hardware peripherals but motor controllers aren't one of them. That's why the RaspiRobot project got started. The RaspiRobot board is an expansion board for the Pi that turns it into a robot controller. The board comes as a kit of through-hole parts which is easy to...

    John Jay based in Georgia, USA, is a retired engineer who designed some boards for the Raspberry Pi to help his partner to learn Raspberry Pi. Although at first it was a...

    John Jay based in Georgia, USA, is a retired engineer who designed some boards for the Raspberry Pi to help his partner to learn Raspberry Pi. Although at first it was a small act that just for his friends, but with the growing people in the open-source community participating, more and more people find that these packages really works. So, he decided to releases these kits. Cooperated with Elecrow, these packages have been produced quickly. And here with Elecrow, we...

"This ZIF connector mates with the 6-conductor ribbon cable for the GP-2106 GPS module. Use it to roll your own GP-2106 carrier board! Documents: Datasheet (FH34SRJ-6S-0.5SH) " ...

"This ZIF connector mates with the 6-conductor ribbon cable for the GP-2106 GPS module. Use it to roll your own GP-2106 carrier board! Documents: Datasheet (FH34SRJ-6S-0.5SH) "

"The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform...

"The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform without having to redesign their existing hardware. In other words, if your project is set up for XBee and you want to move it to a standard WiFi network, you can drop this in the same socket without any other new hardware. The RN-XV module is based upon Roving Networks' robust RN-171 Wi-Fi module and...

This bundle includes the following items. 3 epoxy tooling material (rotary CNC) and 3 kraft cylinder (rotary laser) ...

This bundle includes the following items. 3 epoxy tooling material (rotary CNC) and 3 kraft cylinder (rotary laser)

    This is a 3 Pole 5.0mm Screw Terminal Block.It includes 5 units of Terminal Block.There are screws which are tightened for a secure connection for both lugs and bare wire....

    This is a 3 Pole 5.0mm Screw Terminal Block.It includes 5 units of Terminal Block.There are screws which are tightened for a secure connection for both lugs and bare wire. Specification Rated: 250,16A(250V,17.5A)Contact resistance: 200m? MaxInsulation resistance: 5000M? MinTemp range: -30?~+120?Max Soldering: +260? 5sWire range: 22-14AWG(1.5mm2)Strip length: 3.5mm      ...

    Arduino Sensor Shield V4.0 let us to build electronics projects just as easy as piling bricks. It can connect to various modules like sensors, servos, relays, buttons,...

    Arduino Sensor Shield V4.0 let us to build electronics projects just as easy as piling bricks. It can connect to various modules like sensors, servos, relays, buttons, potentiometers. Just plug & play.     Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks,...

Serial Connector - Ribbon Cable (Female, 9-pin) Description: DB9 connectors are a great way to make a tight connection on your project or to plug into existing serial lines. Now you can make...

Serial Connector - Ribbon Cable (Female, 9-pin) Description: DB9 connectors are a great way to make a tight connection on your project or to plug into existing serial lines. Now you can make your own DB9 cables the easy way with these crimp-on ribbon cable connectors. These work great with our 10-wire ribbon cable, you just need to peel back the one unneeded wire. Matching male connectors are available and can be found in the related items below. Includes: Male DB9 connector body Rear...

     This serial WiFi transceiver module is based on ESP8266 SoC.. ESP8266 is a highly integrated chip that has Integrated TCP/IP protocol stack. It offers a complete and...

     This serial WiFi transceiver module is based on ESP8266 SoC.. ESP8266 is a highly integrated chip that has Integrated TCP/IP protocol stack. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.      Besides, ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the...

SM5100B Evaluation Board Description: This is an evaluation board for the SM5100B GSM/GPRS module; everything you need to get started with the cellular module is included on this board. With FTDI's...

SM5100B Evaluation Board Description: This is an evaluation board for the SM5100B GSM/GPRS module; everything you need to get started with the cellular module is included on this board. With FTDI's FT232RL connected up to UART0 of the SM5100B you can send AT commands from a PC terminal straight to the module. This board comes as shown in the picture with the 60-pin SM5100B mating connector, SIM card socket, SPX29302 3.8VDC high-current voltage regulator, FT232RL USB-to-UART,...

One (1) MDF Wasteboard for Snapmaker 2.0 A250. Each Snapmaker model comes with one MDF wasteboard as a CNC platform. This is a replacement wasteboard for your Snapmaker 2.0. The relatively soft...

One (1) MDF Wasteboard for Snapmaker 2.0 A250. Each Snapmaker model comes with one MDF wasteboard as a CNC platform. This is a replacement wasteboard for your Snapmaker 2.0. The relatively soft MDF provides a surface that allows for easy through-cutting operations without having to worry about damaging the tools or your Snapmaker.

One (1) MDF Wasteboard for Snapmaker 2.0 A350. Each Snapmaker model comes with one MDF wasteboard as a CNC platform. This is a replacement wasteboard for your Snapmaker 2.0. The relatively soft...

One (1) MDF Wasteboard for Snapmaker 2.0 A350. Each Snapmaker model comes with one MDF wasteboard as a CNC platform. This is a replacement wasteboard for your Snapmaker 2.0. The relatively soft MDF provides a surface that allows for easy through-cutting operations without having to worry about damaging the tools or your Snapmaker.

Three (3) pieces of Carbon Fiber SheetSpecs: 80 x 80 x 2 mmCarbon Fiber Sheet is a great material for making your own drone frames and any other custom designs that require high-strength and...

Three (3) pieces of Carbon Fiber SheetSpecs: 80 x 80 x 2 mmCarbon Fiber Sheet is a great material for making your own drone frames and any other custom designs that require high-strength and lightweight material.

Three (3) pieces of POM SheetSize: 80 x 80 x 4 mm Polyoxymethylene (POM), also known as acetal, polyacetal and polyformaldehyde, is an engineering thermoplastic used in precision parts...

Three (3) pieces of POM SheetSize: 80 x 80 x 4 mm Polyoxymethylene (POM), also known as acetal, polyacetal and polyformaldehyde, is an engineering thermoplastic used in precision parts requiring high stiffness, low friction, and excellent dimensional stability. The most popular property of POM is its ease of machining. POM is also very hard and abrasion resistant. POM has been widely used in electronic electrical, mechanical, instrument, daily light industry, automobile, and so on. ...

Straight Groove V-bits for Snapmaker 2.0 (3 Bits) The straight groove v-bit is ideal for rotary projects and detailed oriented works. Its special size makes it stand out in most rotary carving tasks...

Straight Groove V-bits for Snapmaker 2.0 (3 Bits) The straight groove v-bit is ideal for rotary projects and detailed oriented works. Its special size makes it stand out in most rotary carving tasks and could be customized through Snapmaker Luban (4-axis CNC functionality) to achieve optimal carving results. Straight Groove V-bits UF20 tungsten steel alloy with high hardness and wear resistance, not only is it suitable for epoxy tooling material, but it is also compatible with a dozen...

An air purifier made specially for Snapmaker 2.0 product series. It's able to remove PM and VOCs released to the air during 3D printing and laser engraving process, ensuring the safety of its users....

An air purifier made specially for Snapmaker 2.0 product series. It's able to remove PM and VOCs released to the air during 3D printing and laser engraving process, ensuring the safety of its users. The Air Purifier must be used in combination with Snapmaker 2.0 Enclosure. Dimensions: 240x240x420mm Hose: 72x2000mm Weight: 8.5kg(excluding the hose and hose clamps) Rated Power: 120W Filtration Efficiency (0.3–0.5 μm): 95.9%

Description This breadboard have 2x 60 rows of interconnected pins (5 per row) and two long rows on both sides - 700 pins in total. Its dimension is 17.6*4.6*8.3cm. Plesae note that it has no...

Description This breadboard have 2x 60 rows of interconnected pins (5 per row) and two long rows on both sides - 700 pins in total. Its dimension is 17.6*4.6*8.3cm. Plesae note that it has no self-adhesive backing and no interlocking part.Features700 Tie PointDimensions: 17.6 * 4.6 * 8.3cm ...

"This is a breakout for the BC127 Bluetooth Module. The BC127 is a highly flexible, low power, small form factor Bluetooth Version 4.0 Certified Audio module. This is an ideal module for developers...

"This is a breakout for the BC127 Bluetooth Module. The BC127 is a highly flexible, low power, small form factor Bluetooth Version 4.0 Certified Audio module. This is an ideal module for developers who want to quickly and cost effectively integrate Bluetooth functionality into their products. The BC127 Breakout board provides basic access to all the pins on the BC127 module, along with a six-pin serial header with the same pinout as the FTDI Basic boards, allowing it to connect to boards like...

"Here is the breakout board for the RFM22B which gives you access to the pins. The RFM22B is a low-cost ISM (industrial, scientific, and medical) FSK (frequency-shift keying) transceiver module...

"Here is the breakout board for the RFM22B which gives you access to the pins. The RFM22B is a low-cost ISM (industrial, scientific, and medical) FSK (frequency-shift keying) transceiver module which offers communication at 434MHz and adjustable output power of up to +17 dBm. The wide operating voltage range of 1.8–3.6 V and low current consumption makes the RFM22 an ideal solution for battery powered applications. Communication with the RFM22B is achieved via a standard 4-wire SPI...

"The Weather Shield is an easy to use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature. There are also connections on this shield to...

"The Weather Shield is an easy to use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature. There are also connections on this shield to optional sensors such as wind speed, direction, rain gauge and GPS for location and super accurate timing. These Weather Shields utilize the HTU21D humidity, MPL3115A2 barometric pressure, and ALS-PT19 light sensors and relies on the HTU21D and MPL3115A2 Arduino libraries. Each shield comes with two...

SPI Shortcut Description: The SPI Shortcut allows you to control SPI pins over USB, allowing for a virtual "SPI Terminal." Using basic serial commands you can access any SPI device...

SPI Shortcut Description: The SPI Shortcut allows you to control SPI pins over USB, allowing for a virtual "SPI Terminal." Using basic serial commands you can access any SPI device such as sensors, media, and even program some devices. You can change all of the SPI features (frequency, data order, etc.) on the fly with no programming involved! Comes with a simple-to-use terminal interface. All you need is the FTDI USB driver and a basic terminal program....

Surface Mount Navigation Switch BreakoutDescription: This is a fully assembled simple breakout board for the surface mount 3-way switch. These switches are commonly found on handheld devices like...

Surface Mount Navigation Switch BreakoutDescription: This is a fully assembled simple breakout board for the surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the user to navigate using up and down selections then select by pressing the plastic piece inwards. Capable of swtiching up to 1.2VA (360mA at 3.3V and 240mA at 5V).Documents: OS-1305.pdf ...

    This is a temprature controlled relay, you can set the relay on/off when the temprature is higher/lower than the temprature you set.The peak voltage capability is up to 250V...

    This is a temprature controlled relay, you can set the relay on/off when the temprature is higher/lower than the temprature you set.The peak voltage capability is up to 250V at 10A when AC and 30V at 10A when DC. With this module, it will be much more easyto implement applications that needs auto power up/down with the temprature varies.     Adjust the on-board potentiometer to adjust the sensitivity. The relay and the signal indicate LED would...

    The fiber optic Temperature Probe TP-01 is a high precision temperature probe for use in a wide temperature range. It is for the temprature measuring of air/solid, but not...

    The fiber optic Temperature Probe TP-01 is a high precision temperature probe for use in a wide temperature range. It is for the temprature measuring of air/solid, but not for liquid. It is a point-like probe housed in a stainless steel tube and with a connector at one end. you can also find the Thermocouple_K_Female Connetor to integrate this sensor to your PCBA Features Length:100cm Measuring Range:-50 - +400 response time: 5s ...