Sale

Tilt-a-Whirl Breakout - RPI-1031 Description: The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right. This breakout...

Tilt-a-Whirl Breakout - RPI-1031 Description: The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right. This breakout board makes it easier to incorporate the RPI-1031 in your next project by breaking the necessary pins out to standard 0.1" spaced headers. This board will work at either 3.3 or 5V. Documents: Schematic Eagle Files Datasheet (RPI-1031) Product Page(RPI-1031) Hookup Guide bildr Tutorial Product...

    This is a new version of infrared distance switch. It has small size and higher ranging, it is able to detect ranging from 3cm to 100cm. It is tiny, easy to use/assemble, and...

    This is a new version of infrared distance switch. It has small size and higher ranging, it is able to detect ranging from 3cm to 100cm. It is tiny, easy to use/assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line, etc. Specification Power supply: 3.8v-5.5v Current(5v): 6mA Range: 3-100cm adjustable Wiki & External links Wiki link ...

    Tower Pro SG90 is a high quality, low-cost servo for all your mechatronic needs. It comes with a 3-pin power and control cable, mounting hardware. Specification Operating...

    Tower Pro SG90 is a high quality, low-cost servo for all your mechatronic needs. It comes with a 3-pin power and control cable, mounting hardware. Specification Operating Voltage: 4.8 ~ 6.0V Operating Speed: 0.12sec/60 degree(4.8V)~0.1sec/60 degree(6.0V) Torque: 1.6kg/cm(4.8V) Dead Band Width: 5usec Temperature Range: -30?~+60? Cable Length: 25cm Brand name: Tower Pro location of each pin: red (+), brown (-), yellow (signal). ...

Transceiver nRF2401A Module Trace AntennaDescription: Miniature RF (MiRF) 2.4GHz transceiver modules with built in antenna designed around the Nordic Semiconductor nRF2401A with high sensitivity and...

Transceiver nRF2401A Module Trace AntennaDescription: Miniature RF (MiRF) 2.4GHz transceiver modules with built in antenna designed around the Nordic Semiconductor nRF2401A with high sensitivity and good range. These units are a SparkFun exclusive; small in stature, big on performance, all wrapped up in a user friendly package. Units come with an empty 0.1" spaced footprint ready for a straight header, right angle header (recommended), or your own wires/umbilical cable.The...

It is a cost-effective shell for your Micro: bit development board. The shell has a transparent acrylic body, which can allow you see the inside clearly. It can be assembled yourselves, and there is...

It is a cost-effective shell for your Micro: bit development board. The shell has a transparent acrylic body, which can allow you see the inside clearly. It can be assembled yourselves, and there is no lock, so it is easy to assemble. It is designed for Micro: bit development board, the high practical value and beautiful looking can be a great choice for you. Specifications Color: transparent Size: 33x86mm Material: acrylic Package list Transparent Acrylic Shell for Micro: bit x 1 ...

    This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the...

    This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ?1.5g and ?6g measurement ranges. Other features include a sleep mode, signal conditioning, a 1-pole low pass filter, temperature compensation, self test, and 0g-detect which detects linear freefall. Zero-g offset and sensitivity are factory set and require no external devices....

ThisisamountingbracketdesignedforourURMultrasonicsensorseriesItisfullycompatiblewithURM37andURM04nbspnbspYoucanalsohavethisitemwithonly300rewardpoints||Specification| Mounting Pitch: 14mm(0.55 in)...

ThisisamountingbracketdesignedforourURMultrasonicsensorseriesItisfullycompatiblewithURM37andURM04nbspnbspYoucanalsohavethisitemwithonly300rewardpoints||Specification| Mounting Pitch: 14mm(0.55 in) Weight: 5g Size: 60mm x 20mm x 30mm (2.4in x 0.8in x 1.2in)|ShippingList| Bracket x1 Rubber Ring x2 Screw x2

"This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. Compatible with most SFE designed USB boards...

"This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. Compatible with most SFE designed USB boards as well as USB Arduino boards like the Uno. Length: 6 Feet"

USB Weather Board Description: Got weather? This board can handle it. The USB Weather Board includes onboard sensors for barometric pressure, humidity, temperature, and light level....

USB Weather Board Description: Got weather? This board can handle it. The USB Weather Board includes onboard sensors for barometric pressure, humidity, temperature, and light level. We've also added headers in the new version so you can connect the board to our weather meters (not included), adding sensors for wind speed, wind direction, and rainfall. You can send all this data to a computer or datalogger via mini-USB cable, TTL serial (3.3V), or wirelessly...

    This USBSerial Adapter is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated FT232 IC, It can do many things such as used for...

    This USBSerial Adapter is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated FT232 IC, It can do many things such as used for programming(Arduino Pro Mini), debug some hardware or communicating with MCU applications. On the other hand, you may connect your PC to various wireless applications via the BEE compatible modules. Features Reset button for BEE modules 3.3V and 5V dual power output 3.3V and 5V IO compatible USB 2.0 protocol...

Wind & Water Power Turbines Description: The Wind & Water Power Turbines convert the wind & water to the mechanical energy and then convert to electricity power. This mini Turbines...

Wind & Water Power Turbines Description: The Wind & Water Power Turbines convert the wind & water to the mechanical energy and then convert to electricity power. This mini Turbines outputs small power for small projects such as LED, suitable for DIY projects. Note that the output of the turbine is AC, Rectifiers are needed if you want to change it into DC. As we tested, the turbines can power 5 LEDs with a wind speed 20 km/h, and 10 LEDs with a wind speed 50 km/h. you can use this...

    The Wireless Charger& Receiver adopts two copper wire coil superposition to active the wireless charging, it can be used in electronic equipments in common use for close...

    The Wireless Charger& Receiver adopts two copper wire coil superposition to active the wireless charging, it can be used in electronic equipments in common use for close wireless charging or power supply. This product consisted of a transmitter and receiver, could serve as a replacement for the Wireless Power Supply with stable 5V output voltage and maximum 600mA output current. Its small size and insulation coil is more suitable for using in wireless...

The Wireless SD card shield allows an Arduino board to communicate wirelessly using a wireless module, and adds storage to your Arduino project. The XBee Shield is based on the Xbee modules from...

The Wireless SD card shield allows an Arduino board to communicate wirelessly using a wireless module, and adds storage to your Arduino project. The XBee Shield is based on the Xbee modules from Digi, but can use any Bee module with the same footprint. It supports SD, SDHC, or MicroSD TF cards. Use the on-board toggle switch to select the SD card type. And when you want plug a sd card on it,you should select the switch to the right direction. About the wireless module, it only uses you two...

WS2801 Breakout Description: This is a breakout board for the WS2801 RGB LED controller, the same IC used in our addressable RGB LED strips. The board comes with the chip on one side and an RGB...

WS2801 Breakout Description: This is a breakout board for the WS2801 RGB LED controller, the same IC used in our addressable RGB LED strips. The board comes with the chip on one side and an RGB LED on the other. Several of these breakouts can be chained together to form a display or an addressable string. Voltage, ground, clock and data are broken out as input on one side and output on the other to standard 0.1" spaced headers. Documents: Schematic Eagle Files Datasheet (WS2801)...

"This is the XBee XBP24-BZ7PIT-004 module from Digi. The new Series 2B improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh...

"This is the XBee XBP24-BZ7PIT-004 module from Digi. The new Series 2B improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. Series 2B modules use a different hardware configuration...

    XBee shield will make interfacing multiple Bee-style (XBee, GPS Bee, Bluetooth Bee and etc) easier than ever before. it has large proto area, customizable software, serial,...

    XBee shield will make interfacing multiple Bee-style (XBee, GPS Bee, Bluetooth Bee and etc) easier than ever before. it has large proto area, customizable software, serial, port for easier prototyping. Features arduino main board compatible 3 indicator LED?ON/Sleep, RSSI, ASSOC?for XBee Full size with free drills Reset button for XBee and base board Provide maximal 500mA under 3.3V Full break out for XBee Full break out for the base board Package list XBee Shield PCBA...