Shop All

Serial Connector - Ribbon Cable (Female, 9-pin) Description: DB9 connectors are a great way to make a tight connection on your project or to plug into existing serial lines. Now you can make...

Serial Connector - Ribbon Cable (Female, 9-pin) Description: DB9 connectors are a great way to make a tight connection on your project or to plug into existing serial lines. Now you can make your own DB9 cables the easy way with these crimp-on ribbon cable connectors. These work great with our 10-wire ribbon cable, you just need to peel back the one unneeded wire. Matching male connectors are available and can be found in the related items below. Includes: Male DB9 connector body Rear...

     This serial WiFi transceiver module is based on ESP8266 SoC.. ESP8266 is a highly integrated chip that has Integrated TCP/IP protocol stack. It offers a complete and...

     This serial WiFi transceiver module is based on ESP8266 SoC.. ESP8266 is a highly integrated chip that has Integrated TCP/IP protocol stack. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.      Besides, ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the...

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts...

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-in. of maximum torque at 0.10 sec/60° This small servo comes with a standard 3 pin power and control cable, and all hardware listed below. Note: This servo is rated for 180° rotation, but in actuality it only hits ~160°. Includes: 1x Micro Size Servo 1x Single Arm Micro Horn 1x...

Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60° A...

Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60° A standard 3-pin power and control cable is attached and all hardware listed below is included. Includes: 1x SM-S3317S Full Rotation Servo 1x Single Arm Horn 1x Double Arm Horn 1x Four Point Horn 4x Rubber Grommets 4x 2x15mm Phillips Screw 4x Brass Eyelets Features: Voltage: 4.8-6.0 Volts Torque:...

Here is a powerful, low-cost, reliable servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 83.47 oz-in. of maximum torque at 0.16 sec/60° This is a tough little...

Here is a powerful, low-cost, reliable servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 83.47 oz-in. of maximum torque at 0.16 sec/60° This is a tough little servo with a standard 3 pin power and control cable, and all hardware listed below. Replaces:ROB-9064 Includes: 1x FS5106B High Torque Servo 1x Double Arm Horn 1x Circle Horn 1x Four Point Horn 1x Six Point Horn 2x 3x10mm Phillips Screw 4x 2x13mm Mounting Phillips Screw 4x Rubber Grommets 4x Brass...

Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A...

Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-pin power and control cable is attached and all hardware listed below is included. Includes: 1x SM-S4303R High Torque Continuous Rotation Servo 1x Mounting Screw 1x Four Point Horn 1x Six Point Horn 2x Double Arm Horn (1x Large, 1x Medium) 2x Circle Horn (1x Large, 1x Medium) 4x Rubber...

"Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of maximum torque at 0.18 sec/60° This is a small...

"Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of maximum torque at 0.18 sec/60° This is a small servo with a standard 3 pin power and control cable (red = power, brown = ground, and yellow = data), and all hardware listed below. Features: Voltage: 4.8-6.0 Volts Torque: 38.8/44.4 oz-in. (4.8/6.0V) Speed: 0.20/0.18 sec/60° (4.8/6.0V) Rotation: 180° Dual Ball Bearing Metal Gears...

This is the classic Hitec HS-422 servo. This solid consumer grade servo is able to take in 6 volts and deliver 57 oz-in. of maximum torque at 0.16 sec/60°, this is a simple servo for any beginner...

This is the classic Hitec HS-422 servo. This solid consumer grade servo is able to take in 6 volts and deliver 57 oz-in. of maximum torque at 0.16 sec/60°, this is a simple servo for any beginner project! This high quality servo is perfect for your mechatronic needs and if you are looking to get into robotics, this is where to start. The HS-422 servo comes standard with a 3-pin power and control cable and all hardware listed below. Includes: 1x HS-422 Servo 1x Circle Horn 1x Double Arm Horn 1x...

The SN74HC595N is a simple 8-bit shift register IC. Simply put, this shift register is a device that allows additional inputs or outputs to be added to a microcontroller by converting data between...

The SN74HC595N is a simple 8-bit shift register IC. Simply put, this shift register is a device that allows additional inputs or outputs to be added to a microcontroller by converting data between parallel and serial formats. Your chosen microprocessor is able to communicate with the The SN74HC595N using serial information then gathers or outputs information in a parallel (multi-pin) format. Essentially it takes 8 bits from the serial input and then outputs them to 8 pins. This small DIP...

We are excited to introduce our new collection of PLA filaments, which includes Tricolor PLA, Matte PLA, Shiny PLA, PLA+, and PLA Transparent. To ensure optimal printing results, we recommend the...

We are excited to introduce our new collection of PLA filaments, which includes Tricolor PLA, Matte PLA, Shiny PLA, PLA+, and PLA Transparent. To ensure optimal printing results, we recommend the following printing parameters:- Extruder Temperature: 190-220°C (Recommended: 200°C)- Bed Temperature: 50-60°C- Fan Speed: 100%- Printing Speed: 40-100mm/s- Heated Bed: Optional- Recommended Build Surfaces: Masking paper, PVP solid glue, or PEIThese parameters will help you achieve the best possible...

We are excited to introduce our new collection of PLA filaments, which includes Tricolor PLA, Matte PLA, Shiny PLA, PLA+, and PLA Transparent. To ensure optimal printing results, we recommend the...

We are excited to introduce our new collection of PLA filaments, which includes Tricolor PLA, Matte PLA, Shiny PLA, PLA+, and PLA Transparent. To ensure optimal printing results, we recommend the following printing parameters:- Extruder Temperature: 190-220°C (Recommended: 200°C)- Bed Temperature: 50-60°C- Fan Speed: 100%- Printing Speed: 40-100mm/s- Heated Bed: Optional- Recommended Build Surfaces: Masking paper, PVP solid glue, or PEIThese parameters will help you achieve the best possible...

Silicone Nozzle Cover For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Silicone Nozzle Cover For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Silicone Nozzle Cover for the Ultimaker S5 For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Silicone Nozzle Cover for the Ultimaker S5 For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Overview:The Silicone Sock for Hotend is made from high-quality silicone for higher temperature resistance (rated to 300°C printing temperatures).Ensuring optimal thermal insulation and tear...

Overview:The Silicone Sock for Hotend is made from high-quality silicone for higher temperature resistance (rated to 300°C printing temperatures).Ensuring optimal thermal insulation and tear resistance, the silicone sock also provides the nozzle with long-lasting protection from cooling air and plastic adhesion.Installation: During the installation process, please make sure the silicone sock fits exactly into place before printing.Learn more about silicone sock replacement here:...

These skate wheel adaptors have a diameter of 1”, a width of 0.32”, and utilize the 0.77” hub pattern. These adaptors allow you to attach the 2.975” or 4.90” skate wheels to ¼” drive shafts....

These skate wheel adaptors have a diameter of 1”, a width of 0.32”, and utilize the 0.77” hub pattern. These adaptors allow you to attach the 2.975” or 4.90” skate wheels to ¼” drive shafts. Actobotics is a robotics building system based around extruded aluminum channels, gears, precision shafts, and ball bearings. Thanks to the two standardized hole patterns, nearly all Actobotics components can be intuitively connected together. The wide range of components makes building complex...

SM5100B Evaluation Board Description: This is an evaluation board for the SM5100B GSM/GPRS module; everything you need to get started with the cellular module is included on this board. With FTDI's...

SM5100B Evaluation Board Description: This is an evaluation board for the SM5100B GSM/GPRS module; everything you need to get started with the cellular module is included on this board. With FTDI's FT232RL connected up to UART0 of the SM5100B you can send AT commands from a PC terminal straight to the module. This board comes as shown in the picture with the 60-pin SM5100B mating connector, SIM card socket, SPX29302 3.8VDC high-current voltage regulator, FT232RL USB-to-UART,...

One (1) MDF Wasteboard for Snapmaker 2.0 A250. Each Snapmaker model comes with one MDF wasteboard as a CNC platform. This is a replacement wasteboard for your Snapmaker 2.0. The relatively soft...

One (1) MDF Wasteboard for Snapmaker 2.0 A250. Each Snapmaker model comes with one MDF wasteboard as a CNC platform. This is a replacement wasteboard for your Snapmaker 2.0. The relatively soft MDF provides a surface that allows for easy through-cutting operations without having to worry about damaging the tools or your Snapmaker.

One (1) MDF Wasteboard for Snapmaker 2.0 A350. Each Snapmaker model comes with one MDF wasteboard as a CNC platform. This is a replacement wasteboard for your Snapmaker 2.0. The relatively soft...

One (1) MDF Wasteboard for Snapmaker 2.0 A350. Each Snapmaker model comes with one MDF wasteboard as a CNC platform. This is a replacement wasteboard for your Snapmaker 2.0. The relatively soft MDF provides a surface that allows for easy through-cutting operations without having to worry about damaging the tools or your Snapmaker.

Three (3) pieces of Carbon Fiber SheetSpecs: 80 x 80 x 2 mmCarbon Fiber Sheet is a great material for making your own drone frames and any other custom designs that require high-strength and...

Three (3) pieces of Carbon Fiber SheetSpecs: 80 x 80 x 2 mmCarbon Fiber Sheet is a great material for making your own drone frames and any other custom designs that require high-strength and lightweight material.

Three (3) pieces of POM SheetSize: 80 x 80 x 4 mm Polyoxymethylene (POM), also known as acetal, polyacetal and polyformaldehyde, is an engineering thermoplastic used in precision parts...

Three (3) pieces of POM SheetSize: 80 x 80 x 4 mm Polyoxymethylene (POM), also known as acetal, polyacetal and polyformaldehyde, is an engineering thermoplastic used in precision parts requiring high stiffness, low friction, and excellent dimensional stability. The most popular property of POM is its ease of machining. POM is also very hard and abrasion resistant. POM has been widely used in electronic electrical, mechanical, instrument, daily light industry, automobile, and so on. ...

Straight Groove V-bits for Snapmaker 2.0 (3 Bits) The straight groove v-bit is ideal for rotary projects and detailed oriented works. Its special size makes it stand out in most rotary carving tasks...

Straight Groove V-bits for Snapmaker 2.0 (3 Bits) The straight groove v-bit is ideal for rotary projects and detailed oriented works. Its special size makes it stand out in most rotary carving tasks and could be customized through Snapmaker Luban (4-axis CNC functionality) to achieve optimal carving results. Straight Groove V-bits UF20 tungsten steel alloy with high hardness and wear resistance, not only is it suitable for epoxy tooling material, but it is also compatible with a dozen...

An air purifier made specially for Snapmaker 2.0 product series. It's able to remove PM and VOCs released to the air during 3D printing and laser engraving process, ensuring the safety of its users....

An air purifier made specially for Snapmaker 2.0 product series. It's able to remove PM and VOCs released to the air during 3D printing and laser engraving process, ensuring the safety of its users. The Air Purifier must be used in combination with Snapmaker 2.0 Enclosure. Dimensions: 240x240x420mm Hose: 72x2000mm Weight: 8.5kg(excluding the hose and hose clamps) Rated Power: 120W Filtration Efficiency (0.3–0.5 μm): 95.9%

These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate...

These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as an accurate positional indicator for CNC head positioning, variable user input (volume level input for example), straight user input (multiple button areas translate to given resistance levels), and many other applications. Unit comes with adhesive...

This is your basic spool of lead free solder with a water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how...

This is your basic spool of lead free solder with a water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder. If you are just beginning to solder, we recommend you order the leaded solder. Lead-free solder is a bit harder to use (does not flow as well). Mix: 99.3% Sn / 0.7% Cu Documents: MSDS ...

This is your basic tube of unleaded (Pb-free) solder with a no clean, water soluble resin core. 0.031" gauge and 15 grams. Mix: 96.5% tin / 3.0% silver / 0.5% copper

This is your basic tube of unleaded (Pb-free) solder with a no clean, water soluble resin core. 0.031" gauge and 15 grams. Mix: 96.5% tin / 3.0% silver / 0.5% copper

This is your basic spool of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on...

This is your basic spool of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder. Mix: 63% Sn / 37% Pb

This is your basic tube of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 15 grams (around 5ft). Easy to solder with - recommended for beginners. Mix: 63% Sn / 37% Pb ...

This is your basic tube of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 15 grams (around 5ft). Easy to solder with - recommended for beginners. Mix: 63% Sn / 37% Pb

The Solder Vacuum, a great (and sometimes under appreciated) little tool for solder rework. It allows you to pull the molten solder out of a connection or via with ease. To use it you simply depress...

The Solder Vacuum, a great (and sometimes under appreciated) little tool for solder rework. It allows you to pull the molten solder out of a connection or via with ease. To use it you simply depress the plunger, heat up your solder, place the nozzle over the solder you want to remove and finally just push the button. The piston pops up and the solder disappears! This solder vacuum has a black metal body with a hard plastic nozzle and buttons.

Solder wick, coffee, and paper towels keep SparkFun running. You can steal someone's diagonal cutters for a minute, but you'd better ask before touching their solder wick. Solder wick is composed of...

Solder wick, coffee, and paper towels keep SparkFun running. You can steal someone's diagonal cutters for a minute, but you'd better ask before touching their solder wick. Solder wick is composed of copper threads braided together. Flux is normally added to help the solder flow from where it is not supposed to be (the jumper) to the wick. Hence, solder wick is sometimes called desolder braid. Yes, you really can solder anything, and solder wick is a large part of the process. This wick is...

This is a replacement soldering tip for the Weller WLC100 soldering iron. It is a standard type of soldering tip, measuring 0.062" (1.58mm) wide. Replacing the tip is a breeze --- simply unscrew the...

This is a replacement soldering tip for the Weller WLC100 soldering iron. It is a standard type of soldering tip, measuring 0.062" (1.58mm) wide. Replacing the tip is a breeze --- simply unscrew the currently attached tip with a flat-head screwdriver, slip the replacement tip in, and screw it into place. The standard Weller tip has been pre-tinned with a lead-free alloy.

Description This breadboard have 2x 60 rows of interconnected pins (5 per row) and two long rows on both sides - 700 pins in total. Its dimension is 17.6*4.6*8.3cm. Plesae note that it has no...

Description This breadboard have 2x 60 rows of interconnected pins (5 per row) and two long rows on both sides - 700 pins in total. Its dimension is 17.6*4.6*8.3cm. Plesae note that it has no self-adhesive backing and no interlocking part.Features700 Tie PointDimensions: 17.6 * 4.6 * 8.3cm ...

Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. This smaller solenoid is designed to work directly with 5V which makes it a great match for...

Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. This smaller solenoid is designed to work directly with 5V which makes it a great match for embedded projects. It has a throw of about 4.5mm and 2 M2 mounting holes on the body. The wire lead is about 2" long and is terminated with a 2-pin JST PH connector. Note: The mounting holes on this solenoid are actually 1.6mm in diameter. This will allow you to tap for an M2 screw. Also, although...

Overview The Bambu Cool Sheet is a sheet with an adhesive side for replacing the sheet on your Cool Plate. Compatibility X1 Series and P1 Series Note The Bambu Cool sheet is easy to replace and...

Overview The Bambu Cool Sheet is a sheet with an adhesive side for replacing the sheet on your Cool Plate. Compatibility X1 Series and P1 Series Note The Bambu Cool sheet is easy to replace and install. After tearing off the original sheet, please use alcohol to wipe the surface clean. Make sure the surface stays dry while applying a new sheet.You can use an anhydrous ethanol solution or isopropanol solution with a concentration of over 90% to wipe the plate.You can also use detergent and...

Overview The Bambu High-Temperature Sheet (Smooth PEI) is a sheet with an adhesive side for replacing the sheet on your High-Temperature Plate. Compatibility X1 Series and P1 Series Note The Bambu...

Overview The Bambu High-Temperature Sheet (Smooth PEI) is a sheet with an adhesive side for replacing the sheet on your High-Temperature Plate. Compatibility X1 Series and P1 Series Note The Bambu High-Temperature sheet is easy to replace and install. After tearing off the original sheet, please use alcohol to wipe the surface clean. Make sure the surface stays dry while applying a new sheet.You can use an anhydrous ethanol solution or isopropanol solution with a concentration of over 90% to...

The LSM6DS3 is a accelerometer and gyroscope sensor with a giant 8kb FIFO buffer and embedded processing interrupt functions, specifically targeted at the cellphone market. Due to the capabilities...

The LSM6DS3 is a accelerometer and gyroscope sensor with a giant 8kb FIFO buffer and embedded processing interrupt functions, specifically targeted at the cellphone market. Due to the capabilities and low cost of the LSM6DS3 we've created this small breakout board just for you! Each LSM6DS3 Breakout has been designed to be super-flexible and can be configured specifically for many applications. With the LSM6DS3 Breakout you will be able to detect shocks, tilt, motion, taps, count steps, and...

"4-digit 7-segment displays are really neat little devices, it’s a shame that they can be so cumbersome to control. Well we’ve solved that problem by making them a little bit...

"4-digit 7-segment displays are really neat little devices, it’s a shame that they can be so cumbersome to control. Well we’ve solved that problem by making them a little bit “smarter.” The SparkFun 7-Segment Serial Display combines a classic 4-digit 7-segment display and an ATMega328 microcontroller allowing you to control every segment individually using only a few serial lines. The Serial 7-Segment Display can be controlled in one of three ways: Serial TTL...

Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don't. Sensor acts like a transistor - the greater the incoming light, the higher the analog voltage on...

Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don't. Sensor acts like a transistor - the greater the incoming light, the higher the analog voltage on the signal pin. Documents: Hookup Guide Datasheet GitHub ...

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the...

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction. To control it, connect 4 digital outputs to the chip's address select pins (S0-S3), and send it the...

Robots are fun, and Arduinos are easy. So wouldn't it be nice if there were a kit that included everything you need to get your Arduino device set up to control a simple two-motor-circuit buddy? The...

Robots are fun, and Arduinos are easy. So wouldn't it be nice if there were a kit that included everything you need to get your Arduino device set up to control a simple two-motor-circuit buddy? The SparkFun Ardumoto Shield Kit is perfect for any robot enthusiast and includes an Ardumoto Shield, as well as pairs of tires, motors, connectors and wires. And, of course, it’s all stuffed in a classic SparkFun red box (which may come in handy as a robot chassis). The Ardumoto Shield is an...

The SparkFun BME280 Atmospheric Sensor Breakout is the easy way to measure barometric pressure, humidity, and temperature readings all without taking up too much space. Basically, anything you need...

The SparkFun BME280 Atmospheric Sensor Breakout is the easy way to measure barometric pressure, humidity, and temperature readings all without taking up too much space. Basically, anything you need to know about atmospheric conditions you can find out from this tiny breakout. The BME280 Breakout has been design to be used in indoor/outdoor navigation, weather forecasting, home automation, and even personal health and wellness monitoring. The on-board BME280 sensor measures atmospheric pressure...

"This is a breakout board for the Bosch BMP180 high-precision, low-power digital barometer. The BMP180 offers a pressure measuring range of 300 to 1100 hPa with an accuracy down to 0.02 hPa in...

"This is a breakout board for the Bosch BMP180 high-precision, low-power digital barometer. The BMP180 offers a pressure measuring range of 300 to 1100 hPa with an accuracy down to 0.02 hPa in advanced resolution mode. It’s based on piezo-resistive technology for high accuracy, ruggedness and long term stability. These come factory-calibrated, with the calibration coefficients already stored in ROM. What makes this sensor great is that it is nearly identical to its former rev, the...

Are you new to soldering and want to learn the basics with one easy kit? This Flashlight Soldering Kit is an easy to assemble soldering kit designed to help teach the basics of through hole...

Are you new to soldering and want to learn the basics with one easy kit? This Flashlight Soldering Kit is an easy to assemble soldering kit designed to help teach the basics of through hole soldering and circuit design. This kit requires you to only solder four unique parts onto a PCB and then insert a CR2032 battery, once completed you will be provided with a simple flashlight that will light up dark areas and keep the monsters away! Inside each Basic Flashlight Soldering Kit bag is a PCB, a...

The SparkFun Beginner Parts Kit is a small container of parts frequently used by beginning (or even experienced) hobbyists that gives you all of the basic through-hole components you will need to...

The SparkFun Beginner Parts Kit is a small container of parts frequently used by beginning (or even experienced) hobbyists that gives you all of the basic through-hole components you will need to get started playing with embedded projects. These are the "bubble gum" parts that we regularly use or have often seen requested in classes. Inside this kit you will find a good starter assortment of caps, ICs, regulators, diodes and good-for-blinky LEDs. This kit also features our Adjustable Parts Box...

You don’t have the power? Well, there’s no need to ask Scotty – the SparkFun Benchtop Power Board Kit has your back. This board will let you take advantage of your power supply to create a benchtop...

You don’t have the power? Well, there’s no need to ask Scotty – the SparkFun Benchtop Power Board Kit has your back. This board will let you take advantage of your power supply to create a benchtop power supply with enough juice to run almost any of your embedded electronics projects. The benchtop power board kit was created to provide quick access to the typical voltages needed when developing physical computing projects (embedded systems). After assembling the kit you'll have access to four...

"This is a breakout for the BC127 Bluetooth Module. The BC127 is a highly flexible, low power, small form factor Bluetooth Version 4.0 Certified Audio module. This is an ideal module for developers...

"This is a breakout for the BC127 Bluetooth Module. The BC127 is a highly flexible, low power, small form factor Bluetooth Version 4.0 Certified Audio module. This is an ideal module for developers who want to quickly and cost effectively integrate Bluetooth functionality into their products. The BC127 Breakout board provides basic access to all the pins on the BC127 module, along with a six-pin serial header with the same pinout as the FTDI Basic boards, allowing it to connect to boards like...

The Bluetooth Mate is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our Arduino Pros and LilyPad Arduinos. These modems work as a serial (RX/TX) pipe, and are...

The Bluetooth Mate is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our Arduino Pros and LilyPad Arduinos. These modems work as a serial (RX/TX) pipe, and are a great wireless replacement for serial cables. Any serial stream from 2400 to 115200bps can be passed seamlessly from your computer to your target. Bluetooth Mate has the same pin out as the FTDI Basic, and is meant to plug directly into an Arduino Pro, Pro Mini, or LilyPad Mainboard. Because we've...

The BlueSMiRF is the latest Bluetooth****wireless serial cable replacement from SparkFun Electronics! These modems work as a serial (RX/TX) pipe. Any serial stream from 2400 to 115200bps can be...

The BlueSMiRF is the latest Bluetooth****wireless serial cable replacement from SparkFun Electronics! These modems work as a serial (RX/TX) pipe. Any serial stream from 2400 to 115200bps can be passed seamlessly from your computer to your target. We've tested these units successfully over open air at 350ft (106m)! The latest version of this board also breaks out PIO4. Note: The remote unit can be powered from 3.3V up to 6V for easy battery attachment. All signal pins on the remote unit are...

Blynk is an easy to use app builder that allows users to add a variety of buttons, sliders, graphical displays and even RGB controllers to their phone. The SparkFun Blynk Board is specially designed...

Blynk is an easy to use app builder that allows users to add a variety of buttons, sliders, graphical displays and even RGB controllers to their phone. The SparkFun Blynk Board is specially designed to work with the ‘widgets’ within the Blynk mobile app to create your next IoT project. Monitor local weather conditions, control LEDs from your phone, even send a tweet when it’s time to water your plants! Every Blynk Board comes fully programmed and also includes a Blynk subscription code card...

Here is a very simple breadboard power supply kit that takes power from a DC wall wart and outputs a selectable 5V or 3.3V regulated voltage. The .1" headers are mounted on the bottom of the PCB for...

Here is a very simple breadboard power supply kit that takes power from a DC wall wart and outputs a selectable 5V or 3.3V regulated voltage. The .1" headers are mounted on the bottom of the PCB for simple insertion into a breadboard. Pins labeled VCC and GND plug directly into the power lines. The lone pair of pins have no electrical connection but help support the PCB. There are two pins available within the barrel jack footprint. Any stripped +/- DC supply can be connected instead of the...

This is a kit that provides you with a basic assortment of capacitors to start or continue your electronics tinkering. No more looking under your desk to see if you can find a spare capacitor you...

This is a kit that provides you with a basic assortment of capacitors to start or continue your electronics tinkering. No more looking under your desk to see if you can find a spare capacitor you might have dropped a year ago. With this kit you get over 100 of the most popular capacitors. As a bonus they come in a box with a sticker to help you identify which capacitor is which. This assortment of capacitors makes a great gift for beginner and advanced electronics nerds at any time of year!...

"The MG2639 SparkFun Cellular Shield is a perfect addition to any Arduino project that requires connectivity when there’s no WiFi or Ethernet access nearby. The ZTE MG2639 module, which this...

"The MG2639 SparkFun Cellular Shield is a perfect addition to any Arduino project that requires connectivity when there’s no WiFi or Ethernet access nearby. The ZTE MG2639 module, which this shield is built around, supports SMS, TCP, UDP, and can even be used to make or receive phone calls! That means you can send and receive text messages, or use it to remotely connect your Arduino to the Internet. To top it off, it has an integrated GPS receiver, to help it from getting lost. All the...

You've got the wrong USB cable. It doesn't matter which one you have, it's the wrong one. But what if you could have the right one? What if you could have the right one every time? Enter: The...

You've got the wrong USB cable. It doesn't matter which one you have, it's the wrong one. But what if you could have the right one? What if you could have the right one every time? Enter: The Cerberus. The Cerberus is a three-headed cable-beast that will ensure that you're never stuck looking for a USB cable that fits your device. At one end of the Cerberus you have the standard A-type connector, which you can plug into your computer or USB power supply; At the other end are three common USB...

Here is a real time clock based on the DS3234 Real Time Clock IC. The DS3234 is a low-cost, extremely accurate SPI bus real-time clock with an integrated temperature-compensated crystal oscillator...

Here is a real time clock based on the DS3234 Real Time Clock IC. The DS3234 is a low-cost, extremely accurate SPI bus real-time clock with an integrated temperature-compensated crystal oscillator and crystal. The RTC maintains seconds, minutes, hours, day, date, month, and year information. The date at the end of the month is automatically adjusted for months with fewer than 31 days, including corrections of leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM...

This is the Add-On kit for the SparkFun Digital Sandbox (DS) learning platform. With this add-on you will be able to perform the final three circuit experiments found in the DS Guide book which...

This is the Add-On kit for the SparkFun Digital Sandbox (DS) learning platform. With this add-on you will be able to perform the final three circuit experiments found in the DS Guide book which include making an electric musical instrument, telling a motor to spin as fast as you want, and controlling a servo. This is the perfect kit if you've completed everything to do with the Digital Sandbox but are looking for more! Note: If you are looking for the first 13 experiments they can be found...

The TMP102 is an easy-to-use digital temperature sensor from Texas Instruments. The TMP102 breakout allows you to easily incorporate the digital temperature sensor into your project. While some...

The TMP102 is an easy-to-use digital temperature sensor from Texas Instruments. The TMP102 breakout allows you to easily incorporate the digital temperature sensor into your project. While some temperature sensors use an analog voltage to represent the temperature, the TMP102 uses the I2C bus of the Arduino to communicate the temperature. Needless to say, this is a very handy sensor that doesn't require much setup. The TMP102 is capable of reading temperatures to a resolution of 0.0625°C, and...

Edge computing is here! You've probably heard of this latest entry to the long lineage of tech buzzwords like "IoT," "LoRa," and "cloud" before it, but what is “the edge” and why does it matter? The...

Edge computing is here! You've probably heard of this latest entry to the long lineage of tech buzzwords like "IoT," "LoRa," and "cloud" before it, but what is “the edge” and why does it matter? The cloud is impressively powerful but all-the-time connection requires power and connectivity that may not be available. Edge computing handles discrete tasks such as determining if someone said "yes" and responds accordingly. The audio analysis is done at the edge rather than on the web. This...

This small breakout board couples an Electret microphone (100Hz--10kHz) with a 60x mic preamplifier to amplify the sounds of voice, claps, door knocks or any sounds loud enough to be picked up by a...

This small breakout board couples an Electret microphone (100Hz--10kHz) with a 60x mic preamplifier to amplify the sounds of voice, claps, door knocks or any sounds loud enough to be picked up by a microcontroller’s analog-to-digital converter. Each breakout comes fully assembled and works from 2.7V up to 5.5V. The Electret Mic Breakout translates amplitude (not volume) by capturing sound waves between two conducting plates (one a vibrating diaphragm and the other fixed) in the microphone and...

"If you aren’t familiar with the Electric Imp, it essentially provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. The...

"If you aren’t familiar with the Electric Imp, it essentially provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. The SparkFun Electric Imp Breakout Board allows you to explore the capabilities of the Imp by providing standard 0.1" headers to solder to as well as the necessary CryptAuthEE IC to identify your prototype to the Imp Cloud service! This is just the development board, so you’ll need to buy the Imp...

The SparkFun ESP32 Thing is a comprehensive development platform for Espressif’s ESP32, their super-charged version of the popular ESP8266. Like the 8266, the ESP32 is a WiFi-compatible...

The SparkFun ESP32 Thing is a comprehensive development platform for Espressif’s ESP32, their super-charged version of the popular ESP8266. Like the 8266, the ESP32 is a WiFi-compatible microcontroller, but to that it adds support for Bluetooth low-energy (i.e BLE, BT4.0, Bluetooth Smart), and nearly 30 I/O pins. The ESP32’s power and versatility will make it the foundation of IoT and connected projects for many years to come. Why the name? We lovingly call it the “Thing” because it's the...

The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. The Thing is low-cost and easy to...

The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. The Thing is low-cost and easy to use, and Arduino IDE integration can be achieved in just a few steps. We've made the ESP8266 easy to use by breaking out all of the module’s pins, adding a LiPo charger, power supply, and all of the other supporting circuitry it requires. Why the name? We lovingly call it the “Thing” due to it being...

This is the SparkFun ESP8266 Thing Dev Board – a development board that has been solely designed around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective, and...

This is the SparkFun ESP8266 Thing Dev Board – a development board that has been solely designed around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective, and very capable WiFi-enabled microcontroller. Like any microcontroller, it can be programmed to blink LEDs, trigger relays, monitor sensors, or automate coffee makers, and with an integrated WiFi controller, the ESP8266 is a one-stop shop for almost any Internet-connected project. To top it all off,...

This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same. This is a basic breakout...

This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same. This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS...

This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same. This is a basic breakout...

This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same. This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin...

This is a simple breakout board for the MQ - 3, MQ - 4, MQ - 6, MQ - 7, and MQ - 8 gas sensors. With the Gas Sensor Breakout you will be able to utilize each oversized, oddly spaced pins featured on...

This is a simple breakout board for the MQ - 3, MQ - 4, MQ - 6, MQ - 7, and MQ - 8 gas sensors. With the Gas Sensor Breakout you will be able to utilize each oversized, oddly spaced pins featured on every MQ gas sensor product. This is an extremely handy and economical board to have around when detecting multiple types of gases. All you need is the VCC at 5V, GND, and a resistor to an ADC, that is it! Note: This is just the PCB. The appropriate sensors are listed below in the Recommended...